Corner rounding end mills OC301/OC401
Recommended for use
< 55 HRc
< 1600 N/mm2
Steel
Stainless Steel
Cast Iron
Applicable
Aluminium
Coating
AlTiN
| Catalogue number | Corner radius R | Diameter D1 h10 | Shank diameter D2 h6 | Overall length L1 | Length of edge L2 | Reduced neck length L3 | Number of teeth Z |
|---|---|---|---|---|---|---|---|
| OC301.060.050 | 0,5 | 5 | 6 | 57 | - | - | 3 |
| OC301.060.075 | 0,75 | 4,5 | 6 | 57 | - | - | 3 |
| OC301.060.080 | 0,8 | 4,5 | 6 | 57 | - | - | 3 |
| OC401.080.100 | 1 | 6 | 8 | 63 | - | - | 4 |
| OC401.080.125 | 1,25 | 5,5 | 8 | 63 | - | - | 4 |
| OC401.080.150 | 1,5 | 5 | 8 | 63 | - | - | 4 |
| OC401.100.200 | 2 | 6 | 10 | 72 | - | - | 4 |
| OC401.100.250 | 2,5 | 5 | 10 | 72 | - | - | 4 |
| OC401.120.300 | 3 | 6 | 12 | 82 | - | - | 4 |
| OC401.140.350 | 3,5 | 7 | 14 | 82 | - | - | 4 |
| OC401.160.400 | 4 | 8 | 16 | 92 | - | - | 4 |
| OC401.160.450 | 4,5 | 7 | 16 | 92 | - | - | 4 |
| OC401.160.500 | 5 | 6 | 16 | 92 | - | - | 4 |
| OC401.200.600 | 6 | 8 | 20 | 104 | - | - | 4 |
| OC401.220.800 | 8 | 6 | 22 | 110 | - | - | 4 |
| OC401.250.900 | 9 | 7 | 25 | 110 | - | - | 4 |
