Carbide ball-nose end mills for hard materials KK201/KK202
Recommended for use
< 65 HRc
Hardened Steel
Stainless Steel
Cast Iron
Applicable
< 55 HRc
Coating
AlCrN
| Catalogue number | Diameter D1 h8 | Corner edge R 0/-0,02 | Overall length L1 | Length of edge L2 | Reduced neck length L3 | Reduced neck diameter D3 | Shank diameter D2 h6 |
|---|---|---|---|---|---|---|---|
| KK201.010 | 1 | 0,5 | 57 | 2 | 3 | 0,95 | 6 |
| KK201.015 | 1,5 | 0,75 | 57 | 2,5 | 4,5 | 1,45 | 6 |
| KK201.020 | 2 | 1 | 57 | 3 | 7 | 1,9 | 6 |
| KK202.020 | 2 | 1 | 70 | 3 | 17 | 1,9 | 6 |
| KK201.030 | 3 | 1,5 | 57 | 4 | 8 | 2,8 | 6 |
| KK202.030 | 3 | 1,5 | 70 | 4 | 18 | 2,8 | 6 |
| KK201.040 | 4 | 2 | 57 | 5 | 14 | 3,8 | 6 |
| KK202.040 | 4 | 2 | 80 | 5 | 19 | 3,8 | 6 |
| KK201.050 | 5 | 2,5 | 57 | 6 | 21 | 4,8 | 6 |
| KK202.050 | 5 | 2,5 | 80 | 6 | 44 | 4,8 | 6 |
| KK201.060 | 6 | 3 | 57 | 7 | 21 | 5,8 | 6 |
| KK202.060 | 6 | 3 | 80 | 7 | 44 | 5,8 | 6 |
| KK201.080 | 8 | 4 | 63 | 9 | 27 | 7,6 | 8 |
| KK202.080 | 8 | 4 | 90 | 9 | 54 | 7,6 | 8 |
| KK201.100 | 10 | 5 | 72 | 11 | 32 | 9,6 | 10 |
| KK202.100 | 10 | 5 | 100 | 11 | 60 | 9,6 | 10 |
| KK201.120 | 12 | 6 | 83 | 13 | 38 | 11,5 | 12 |
| KK202.120 | 12 | 6 | 110 | 13 | 65 | 11,5 | 12 |
| KK401.160 | 16 | 8 | 92 | 17 | 44 | 15,5 | 16 |
| KK402.160 | 16 | 8 | 130 | 17 | 82 | 15,5 | 16 |
