Carbide finishing end mills for hard materials KR
Recommended for use
< 65 HRc
Hardened Steel
Stainless Steel
Cast Iron
Applicable
< 55 HRc
Coating
AlCrN
| Catalogue number | Numberof teeth Z | Diameter D1 e8 | Corner edge K x 45° | Overall length L1 | Length of edge L2 | Reduced neck length L3 | Reduced neck diameter D3 | Shank diameter D2 h6 |
|---|---|---|---|---|---|---|---|---|
| KR401.030 | 4 | 3 | 0,02 | 57 | 12 | - | - | 6 |
| KR401.040 | 4 | 4 | 0,02 | 57 | 13 | - | - | 6 |
| KR601.050 | 6 | 5 | 0,02 | 57 | 15 | - | - | 6 |
| KR601.060 | 6 | 6 | 0,03 | 57 | 16 | - | - | 6 |
| KR601.080 | 6 | 8 | 0,04 | 70 | 22 | - | - | 8 |
| KR601.100 | 6 | 10 | 0,05 | 72 | 25 | - | - | 10 |
| KR601.120 | 6 | 12 | 0,05 | 83 | 28 | - | - | 12 |
| KR601.140 | 6 | 14 | 0,06 | 83 | 30 | - | - | 14 |
| KR801.160 | 8 | 16 | 0,06 | 92 | 35 | - | - | 16 |
| KR1001.200 | 10 | 20 | 0,07 | 104 | 40 | - | - | 20 |
| KR1002.200 | 10 | 20 | 0,07 | 135 | 70 | 85 | 17,8 | 20 |
| KR1202.250 | 12 | 25 | 0,07 | 186 | 55 | 132 | 24 | 25 |
