Carbide end mills 3 teeth OR301
Recommended for use
< 55 HRc
< 1600 N/mm2
Steel
Stainless Steel
Cast Iron
Copper
Applicable
Aluminium
Coating
AlTiN
| Catalogue number | Number of teeth Z | Diameter D1 h10 | Corner edge K x 45° | Overall length L1 | Length of edge L2 | Reduced neck length L3 | Reduced neck diameter D3 | Shank diameter D2 h6 |
|---|---|---|---|---|---|---|---|---|
| OR301.030 | 3 | 3 | 0,07 | 38 | 7 | - | - | 3 |
| OR301.040 | 3 | 4 | 0,07 | 50 | 8 | - | - | 4 |
| OR301.050 | 3 | 5 | 0,07 | 50 | 10 | - | - | 5 |
| OR301.060 | 3 | 6 | 0,07 | 57 | 10 | - | - | 6 |
| OR301.080 | 3 | 8 | 0,12 | 63 | 16 | - | - | 8 |
| OR301.100 | 3 | 10 | 0,2 | 72 | 19 | - | - | 10 |
| OR301.120 | 3 | 12 | 0,2 | 83 | 22 | - | - | 12 |
| OR301.140 | 3 | 14 | 0,2 | 83 | 22 | - | - | 14 |
| OR301.160 | 3 | 16 | 0,2 | 92 | 26 | - | - | 16 |
| OR301.180 | 3 | 18 | 0,2 | 92 | 26 | - | - | 18 |
| OR301.200 | 3 | 20 | 0,3 | 104 | 32 | - | - | 20 |
